Abstract
The article discusses the mechanism of moisture removal during the processing of a deformable material by the method of instant pressure relief. It was revealed that this method allows two processes to be carried out in one device at the same time: cleaning and dehumidification. A strong influence of the pressure relief time t on the intensification of the process was established, the smaller the value of t, the higher the efficiency of both cleaning and moisture removal. The vectors of pressure, temperature, humidity gradients and their directions in each of the periods of processing and their influence on the efficiency of the processes are determined.
First Page
11
Last Page
15
References
- A.F.Shakirov, “Razrabotka apparaturnogo oformleniya i metoda rascheta proseessa sushki visokovlajnix materialov ot organicheskix rastvoriteley s primineniem sbrosa davleniy” [Development of hardware design and methods for calculating the drying process of high-moisture materials from organic solvents with the use of pressure relief], dis. tehn. nauk, Kazan, 1993, 143 p. (in Russian)
- Yu.A.Mixaylov, “Sushka peregretim parom” [Superheated steam drying], Mоskva: Energiya, 1967, 200 p. (in Russian).
- A.C.Ginzburg, “Osnovi teorii i texniki sushki pishevix produktov” [Fundamentals of the theory and technique of food drying], Mоskva: Pishevaya promishlennost, 1973. 350 p. (in Russian).
- C.C.Kutateladze, “Osnovi teorii teploobmena” [Fundamentals of heat transfer theory], Mоskva: Avol. izdat, 1979, 416 p. (in Russian).
- YE.I.Levashko, “Sushka visokovlajnix materialov sbrosom davleni” [Drying of high-humidity materials by pressure relief], Y. dis kand. texn. nauk, Kazan, 2002. 111 p. (in Russian).
- A.N.Planovskiy, V.I.Mushtayev, V.M.Ulyanov, “Sushka dispersnix materialov v ximicheskoy promishlennosti” [Drying of dispersed materials in the chemical industry], Moskva: Ximiya, 1979. 288 p. (in Russian).
- YE.Y.Shangareyeva, “Razrusheniye vlajnix poristix materialov vsledstviye bistrogo vnutrennego ispareniya pri teplovom udare IFJ” [Destruction of wet porous materials due to rapid internal evaporation during heat shock IFJ], no. 1. pp. 28-44, 1994. (in Russian).
- N.I.Gamayunov, S.N.Gamayunov, “Izmeneniye strukturi kolloidnix kapillyarnoporistix tel v protsesse teplomassoperenosa IFJ” [Changes in the structure of colloidal capillary porous bodies during heat and mass transfer IFJ], vol. 69, pp. 593-597, 1996. (in Russian).
- S.Rijkov, “Osnovi teploobmena” [Basics of heat exchange], Moskva: MGTU im. N.E.Baumana, 2007, 81 p.
10. S.I.Dvoretskiy, V.N.Korolev, S.A.Nagornov, V.P.Taran, “Texnika i texnologiya psevdoojijeniya: Gidrodinamika i teploobmen s pogrujennimi telami”, [Technique and technology of fluidization: hydrodynamics and heat transfer with immersed bodies], Tambov: izdvo TGTU, 2005,168 p. (in Russian).
11. S.Sh.Abdullayeva, X.S.Nurmuxamedov, A.U.Bekbayeva, A.SH.Abdullayev, A.SH.Xadjibayev, “Vliyaniye davleniya ostrogo para na podsushku korneplodov pri ochistke metodom mgnovennogo sbrosa davleniya” [The effect of acute steam pressure on the drying of root crops during cleaning by the method of instant pressure relief], Xraneniye i pererabotka selxozsirya, 2016, no. 4, pp. 912. (in Russian).
12. S.Sh.Abdullayeva, X.S.Nurmuxamedov R.I.Razzokov, A.Sh.Xodjibayev, “K voprosu izmeneniya vlajnosti deformiruyushixsya materialov” [On the issue of changing the moisture content of deformable materials], Mejd. nauch. prakt. konf. “Aktualniye problemi otrasley ximicheskoy texnologii”, Buxara, 10-12 noyabrya, pp.12-14, 2015. (in Russian).
13. A.SH.Abdullayeva, X.S.Nurmuxamedov, S.Sh.Abdullayeva, S.K.Nigmadjanov, “Raschet diametra pnevmotsilindra apparatov mgnovennogo sbrosa davleniya” [Calculation of the diameter of the pneumatic cylinder of instantaneous pressure relief devices], Ximicheskaya texnologi Y. Kontrol i upravleniye, no. 1, pp.21-24, 2015. (in Russian).
14. S.Sh.Abdullayeva, A.Sh.Abdullayev, A.U.Bekbayeva, “Vliyaniye davleniya vodyanogo para na stepen izmelcheniya deformiruyushixsya materialov” [Influence of water vapor pressure on the degree of grinding of deformable materials], Ximiya i ximicheskaya texnologiya, no. 1, pp. 60-62, 2013, (in Russian).
15. S.Sh.Abdullayeva, X.S.Nurmuxamedov, A.Sh.Abdullayev, U.X.Sagdullayev, “Chastichnaya podsushka pri ochistke korneplodov metodom mgnovennogo sbrosa davleniya” [Partial drying when cleaning root crops by instant pressure relief], Moskva, Xraneniye i pererabotka selxozsirya, no. 6. pp.17-18, 2011. (in Russian).
16. S.Sh.Abdullayeva, X.S.Nurmuxamedov, R.I.Razzokov, A.Sh.Xodjibayev, “K voprosu izmeneniya vlajnosti deformiruyushixsya materialov” [On the issue of changing the moisture content of deformable materials], Mejdunarodnaya nauchnoprakticheskaya konferensiya “Aktualniye problemi otrasley ximicheskoy texnologii”, Buxara, pp.12-14, 2015. (in Russian).
17. N.I.Gamayunov, S.N.Gamayunov, “Izmeneniye strukturi kolloidno kapillyarnoporistix tel v protsesse teplomassoperenosa IFJ” [Changes in the structure of the colloid capillary pore of bodies in the process of heat and mass transfer IFJ], vol. 2, no. 6, pp. 593-597, 1996. (in Russian).
Recommended Citation
Abdullaeva, Sadokat Shonazarovna; Nishanova, Sadokat Habibullaevna; Nurmukhamedov, Habibulla Sagdullaevich; and Sultanov, Javokhir Valievich
(2019)
"Mechanism for removing moisture from deformable objects during instant pressure release from a closed system,"
Chemical Technology, Control and Management: Vol. 2019:
Iss.
4, Article 1.
DOI: https://doi.org/10.34920/2019.3.11-15