Abstract
In this paper, questions of determination of the sizes of electrodes of capacity measuring transducers depending on tolerated relative error of measurement are considered. Dependences of ways of laying of grain materials on their electrical conductance are analyzed. It is established that the problem of optimization can be solved by the determined and statistical methods. At the determined method, it is accepted that all particles of the contacting layer with an electrode of bulk materials are located in order. At the statistical technique, the arrangement of particles is accidental, submitting to any distribution law, for example, normal. The example of calculation of the sizes of electrodes, near-optimal determined, and static ways are shown.
First Page
29
Last Page
33
References
1. L.V.Gyachev, Osnovi teorii bunkerov [Fundamentals of the theory of bunkers]. Novosibirsk: Izd-vo Novosibirskogo un-ta, 1992, 311 p. (in Russian).
2. V.A.Bogomyagkix, V.P.Trembich, A.I.Paxaylo, Obosnovanie parametrov i rejimov raboti svodorazrushayushix ustroystv bunkernix doziruyushix sistem selskoxozyaystvennix mashin i ustanovok [Substantiation of parameters and operating modes of arch-breaking devices of bunker dosing systems of agricultural machines and installations]. Zernograd: VNIPTIMESX, 1997, 124 p. (in Russian).
3. V.A.Bogomyagkix, A.P.Pepchuk, Intensifikatsiya razgruzki bunkernix ustroystv v usloviyax svodoobrazovaniya zernistix materialov [Intensification of bunker devices unloading in conditions of bridging of granular materials]. Zernograd: VNIPTIMESX, 1995, 161 p. (in Russian).
4. A.A.Bertov, Intensifikatsiya texnologicheskogo protsessa viseva semyan podsolnechnika apparatom pnevmaticheskoy seyalki: avtoreferat dissertatsii kandidata texnicheskix nauk [Intensification of the technological process of sowing sunflower seeds with a pneumatic seeder: abstract of the dissertation of the candidate of technical sciences]. Zernograd: VNIPTIMESX, 1984, 18 p. (in Russian).
5. A.Yu.Nesmiyan, D.Ye.Shapovalov, I.Xijnyak, “Opredelenie ugla ukladki chastis sipuchix materialov” [Determination of laying angle of bulk material particles], Mexanizatsiya i elektrifikatsiya selskogo xozyaystva, no. 7, pp. 19-20, 2010. (in Russian).
6. I.N.Bronshteyn, K.A.Semendyaev, Spravochnik po matematike dlya injenerov i uchashixsya vuzov [Handbook of mathematics for engineers and University students]. Moskva: Nauka, 1981, 718 p. (in Russian).
7. E.Uljaev, U.M.Ubaydullaev, Sh.N.Narzullaev, E.F.Xudoyberdiev, F.G.Haydarov, “Classification of Detectors of Capacitive Humidity Transducers of Bulk Materials”, International Journal of Advanced Science and Technology, no. 29(11s), pp. 1949 – 1953, 2020, Retrieved from http://sersc.org/journals/index.php/IJAST/article/view/21858
8. A.M.Semenixin, E.B.Safiulina, L.A.Gurinenko i dr., Senaj i silos v transheyax: monografiya [Silage and Silage in Trenches: Monograph]. Zernograd: FGBOU VPO AChGAA, 2012, 202 p. (in Russian).
9. E.Uljaev, Sh.N.Narzullaev, F.G.Xaydarov, “K voprosu razrabotki intellektualnogo kombinirovannogo ustroystva kontrolya vlajnosti sipuchix materialov” [The issue of developing an intelligent combined device for controlling the moisture content of bulk materials], Materiali mejdunarodnoy nauchnoy konferensii «Innovatsionnie resheniya injenerno-texnologicheskix problem sovremennogo proizvodstva», vol. 2, November, 2019, Bukhara, pp. 204-206. (in Russian).
10. B.Dobrzanski, A.Stepniewski, “Physical Properties of Seeds in Technological Processes”, Agricultural and Biological Sciences. «Advances in Agrophysical Research», 2013 under CC BY 3.0 license.
11. A.Nejat, F.Jaliliantabar, R.Gholami, “Physical and mechanical properties of castor seed”, Quality Assurance and Safety of Crops & foods, no. 4, pp. 29–32, 2012.
Recommended Citation
Uljayev, E.; Ubaydullayev, U.M.; Narzullayev, Sh.N.; and Nasimxonov, L.N.
(2020)
"OPTIMIZATION OF THE SIZES OF THE CYLINDRICAL MEASURING TRANSDUCER,"
Chemical Technology, Control and Management: Vol. 2020:
Iss.
5, Article 5.
DOI: https://doi.org/10.34920/2020.5-6.29-32
