Abstract
Hydraulic mechanisms that actuate flat gates, widely used in hydraulic structures, are studied as hydraulic actuators of the system. Their static mathematical models are developed using an integrated methodology with a hydraulic pump, inlet and suction pipes, and internal and external resistance factors. Unlike existing mathematical models, the model developed in this paper allows a detailed description of the characteristics of hydraulic drives due to the fact that pressure losses in the throttle, regulator, and power amplifier, as well as local resistances in hydraulic pipelines, are taken into account.
First Page
29
Last Page
34
References
- Chirag, T. (2017). A review on fluid structure interaction in hydraulic turbines: A focus on hydrodynamic damping. Engineering Failure Analysis, 77, 1-22. doi: 10.1016/j.engfailanal.2017.02.021.
- Tri, C.D., Tri, D.D., Truong, Q.D. and others. (2021). Developments in energy regeneration technologies for hydraulic excavators: A review. Renewable and Sustainable Energy Reviews, 145. doi: 10.1016/j.rser.2021.111076.
- Polonskiy, G.A. (1972). Glubinnie zatvori gidrotexnicheskix soorujeniy [Deep water plants]. Moskva: Kolos. 154 p. (in Russian).
- Saviin, D.M. (1981). Komponovka mexanicheskogo oborudovaniya gidroelektrostansiy [Layout of the mechanical equipment of a hydroelectric power plant]. Moskva: Energoizdat. 136 p. (in Russian).
- Funagira Dam. [Internet source] Wikipedia. [Sited on: 21.07.2022] https://en.wikipedia.org/wiki/Funagira_Dam.
- Antunes, S.J., Vieyra, X.L., Kustodio, A.S., Korrea, K., Fernandes P.R. Remont jelezobetonnogo ekrana GES Kampos Novos (Braziliya). [Internet link] «Hydropower & Dams». [Date: 21.07.2022.] https://www.gidroburo.ru/index.php/c-dopolnitelno/c-1-zhurnalnye-stati/23-c-1-06-remont-zhelezobetonnogo-ekrana-ges-kampos-novos-braziliya (in Russian).
- Martenson, V.Y. (1983). Nekotorye tendensii razvitiya zatvorostroenie za rubejom [Some Trends in the Development of Valve Construction Abroad]. Gidrotexnicheskoe stroitelstvo, 10, 20-22. (in Russian).
- Qosimov, F.O., Ismoilov, M.A. (2020). Vintli elektr ijro mexanizmining dinamik xarakteristikasini xisoblash uchun dasturiy ta’minot. EHM uchun yaratilgan dastur. DGU 20210934.
- Tatiana, A. M., Lasse, I.E., Laurila, J.J. (2013). Pyrhönen, Analysis of electro-hydraulic lifting system's energy efficiency with direct electric drive pump control. Automation in Construction, 30, 144-150. https://doi.org/10.1016/j.autcon.2012.11.009.
- Temnyj, V.P. (1972). Osnovy gidroavtomatiki [Fundamentals of hydroautomatics]. Izd-vo: Nauka, 224 p. (in Russian).
- Qosimov, F.O., To‘raqulov, Z.S., Ismoilov, M.A. (2020). Boshqaruv tizimini tadrijiy yondashuv asosida modellashtirish. Informatika va energetika muammolari. O‘zbekiston jurnali, 2, 46-52.
- Wilson, M. (2015). Automation System Components. Implement. Robot Syst., 39-73. doi: 10.1016/b978-0-12-404733-4.00003-5.
- Pavlov, A.I., Polyanin, I.A., Kozlov, K.E. (2017). Improving the Reliability of Hydraulic Drives Components. Procedia Engineering, 206, 1629-1635. doi: 10.1016/j.proeng.2017.10.689.
- Thomas, A.H. (2015). Measurement and Control Basics. 5 th edition, USA, 404 p.
Recommended Citation
Ismailov, Mirkhalil; Zhang, Dong; and Kasimov, Farkhod
(2023)
"MODEL FOR CALCULATING THE STATIC CHARACTERISTICS OF HYDRAULIC SYSTEMS OF HYDRO TECHNICAL BUILDINGS,"
Chemical Technology, Control and Management: Vol. 2023:
Iss.
1, Article 4.
DOI: https://doi.org/10.59048/2181-1105.1432
Included in
Complex Fluids Commons, Controls and Control Theory Commons, Industrial Technology Commons, Process Control and Systems Commons