Abstract
On the basis of material and heat balances, taking into account the initial and boundary conditions, a mathematical model of the process of measuring the transformation of liquid and gaseous technological media by the method of variable pressure drop is constructed. The analysis of the results of studying the influence of non-stationary flows of a controlled medium on the uncertainty of the results of measuring the flow rate of liquids and gaseous mixtures with a changing hydrodynamic structure of the flow of a controlled medium is performed. A comparative analysis of the calculated and experimental transient processes in the measuring channel of the primary converter was performed, which showed good agreement between the compared data.
First Page
45
Last Page
52
References
- Yusupbekov, N.R., Gulyamov, Sh.M., Ortiqov, E.E. (2022). Investigation of the Influence of Unstationary Gas Flows on the Accuracy of Flow Measurement by the Variable Pressure Differential Method. International Journal of Discoveries and Innovations in Applied Sciences, 2(11), 17-21.
- Kremlevskij, P.P. (2004). Raskhodomery i schetchiki kolichestva veshhestv [Flowmeters and substance counters]. SPb.: Politekhnika, 412 p. (in Russian).
- Drobysheva N.A., Nikiforov A.N. (1984). Izmerenie nestatsionarnykh raskhodov s pomoshhyu suzhayushhikh ustrojstv [Measurement of non-stationary flow rates with the help of narrowing devices]. Metrolog. obesp. izmer. M.: VNIIKI, 3. 32 p. (in Russian).
- Nikitina, T.A., Sicheti, A.I. (1974). Opredeleniya srednego raskhoda pul'siruyushhikh potokov [Definitions of the average flow rate of pulsating flows]. Gidromekhanika, 27, 65-70. (in Russian).
- Nikolaev, N.A., Sabirzyanov, A.N., Tyryshkin, R.A., Fafurin, V.A., Yavkin, V.B. (2010). Vliyanie mestnykh soprotivlenij na koehffitsient istecheniya standartnoj diafragmy [Influence of Local Resistances on the Expiration Factor of a Standard Orifice]. Zakonodatel'naya i prikladnaya metrologiya, 2(105), 20-23. (in Russian).
- Ponomarev, YU.V., Nazarenko, YU.V., Borisenko, V.P. (2009). Neopredelennost' izmereniya osnovnykh parametrov nestatsionarnogo gazovogo potoka v izmeritel'nom truboprovode gazoizmeritel'noj stantsii [Uncertainty in measuring the main parameters of a non-stationary gas flow in the measuring pipeline of a gas measuring station]. Sistemi obrobki informatsii, 5(79), 75-77. (in Russian).
- RD 50-213-80. Pravila izmereniya raskhoda gazov i zhidkostej standartnymi suzhayushhimi ustrojstvami [Rules for measuring the flow of gases and liquids with standard orifice devices]. M.: Izdatel'stvo standartov, 1982.
- ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full: part 1 - General principles and requirements. ISO, 2003. 36 p.
- ISO 5167-2:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full: part 2 - Orifice plates. ISO, 2003. 52 p.
- Fafurin, V.A., Fefelov, V.V., Yatsenko, I.A. (2011). Analiz parametrov chislennykh metodov pri raschete metrologicheskikh kharakteristik raskhodomerov na baze standartnoj diafragmy [Analysis of the parameters of numerical methods in the calculation of the metrological characteristics of flowmeters based on a standard orifice]. Vestnik Kazanskogo tekhnologicheskogo universiteta, 23, 136-141. (in Russian).
- Botros, K.K., Jungowski, W.W., Petela, G. (1992). Gauge line effects and DP transmitter response to flow pulsation through orifice plate. Flow Measurement and Instrumentation, 3(3), 130-144.
- Yusupbekov, N.R., Gulyamov, Sh.M., Ortiqov, E.E. (2022). Some problems of automatic control and management in conditions of uncertainty. Central Asian Research Journal For Interdisciplinary Studies (CARJIS), 2(10), 65-70. DOI: 10.24412/2181-2454-2022-10.
Recommended Citation
Gulyamov, Shukhrat Manapovich and Ortiqov, Elbek Elmirza o'g'li
(2023)
"MODELING OF THE PROCESS OF MEASURING CONVERSION OF THE FLOW OF LIQUID AND GASEOUS MEDIA BY THE METHOD OF VARIABLE PRESSURE DROP,"
Chemical Technology, Control and Management: Vol. 2023:
Iss.
1, Article 6.
DOI: https://doi.org/10.59048/2181-1105.1440
Included in
Complex Fluids Commons, Controls and Control Theory Commons, Industrial Technology Commons, Process Control and Systems Commons