CALCULATION OF HYDRAULIC RESISTANCE OF A TUBULAR-GRIDSE NOZZLE WITH SPIRAL TURBULIZERS

Authors

Nurmukhamedov Habibulla Sagdullaevich, Tashkent Institute of chemical technology. Address: Navoi Street, 32, Tashkent, Uzbekistan, 100011.Follow
Mavlonov Elbek Tulkinovich, Tashkent Institute of chemical technology. Address: Navoi Street, 32, Tashkent, Uzbekistan, 100011. E-mail: elbek8181@mail.ru, Phone: +998974317012.Follow
S.Kh. Nishonova, Tashkent Institute of chemical technology. Address: Navoi Street, 32, Tashkent, Uzbekistan, 100011.
Kh.S. Nurmukhamedov, Tashkent Institute of chemical technology. Address: Navoi Street, 32, Tashkent, Uzbekistan, 100011.

Abstract

The article presents the results of an experimental study on the hydraulic resistance of a tubular-grid nozzle made of smooth pipes and pipes with spiral turbulators. Experiments were carried out with nozzles made of smooth pipes and pipes with turbulators. Spiral turbulators are placed discretely with a step t/d=0,3125-0,9375 and installed on a tube sheet in a checkerboard pattern with a step s/d=1,15-10. Experimental studies were carried out with air flow in the transition region.

It has been established that with increasing numerical values of the dimensionless parameter s/d, the resistance of the pipe package decreases from 1,3 to 1,8 times depending on the flow speed w, the spacing of turbulators t/d and pipes s/d. The research results are summarized and a formula is obtained for calculating the hydraulic resistance of a tubular-grid nozzle with an error of ±10%.

It was revealed that the shape and size of turbulators effectively influence the flow in general and at the pipe wall. In particular, the streamlined design of pipes with turbulators contributes to the formation of a flow structure with the desired properties of the local and vortex effects. In addition, the transition flow regime occurs at lower Reynolds numbers.

First Page

21

Last Page

27

References

1. Aleksandrov, I.A. (1978). Rektifikacionnye i absorbcionnye apparaty. Metody rascheta i osnovy konstruirovaniya [Rectification and absorption devices. Calculation methods and design basics]. M.: Himiya, 280 p. (in Russian).
2. Gusev, V.P., Guseva, Zh.A., Riffel, V.R. (2008). Osnovy teorii, tehnologicheskij, konstruktivnyj i gidravlicheskij raschety rektifikacionnyh kolonn [Fundamentals of theory, technological, constructive and hydraulic calculations of rectification columns]. Tomsk: izd-vo TPU, 62 p. (in Russian).
3. Ramm, I.A. (1978). Rektifikacionnye i absorbcionnye apparaty [Rectification and absorption devices]. M.: Himiya, 277 p. (in Russian).
4. Nurmuhamedov, H.S., Yusupbekov, N.R., Temirov, O.Sh. va b. (2016). Gazlarni qayta ishlash tehnologiyasi, jarayon va qurilmalari. T.: Sharq, 856 b. (in Uzbek).
5. Abdullaev, M.M., Nurmuhamedov, H.S., Nuryllaeva, A.A. i dr. (2023). Intensifikaciya teploobmena v holodilnoj zone absorbcionnyh kolonn [Intensification of heat transfer in the cooling zone of absorption columns]. IFZh, 96(2), 415-421. (in Russian).
6. Kern, D., Kraus, A. (1977). Razvitye poverhnosti teploobmena [Developed heat transfer surfaces]. M.: Energiya, 464 p. (in Russian).
7. Kalinin, E.K., Drejcer, G.A., Kopp, I.Z., Myakochin, A.S. (1998). Effektivnye poverhnosti teploobmena [Effective heat transfer surfaces]. M.: Energoatomizdat, 408 p. (in Russian).
8. Dzyubenko, B.V., Dreitser, G.A., Yakimenko, R.I. (1998). Methodics of Optimum Configuration Choice for Heat Transfer Surfaces of Space Heat Exchangers. Proc. of the First Int.Conf. on Aerospace Heat Exchangers Techology, 369-389.
9. Halitov, R.A., Mahotkin, A.F. (2000). Kontaktnaya tarelka dlya vyhrevyh teplomassoobmennyh apparatov [Contact plate for vortex heat and mass transfer devices]. Patent RF №2152240, MPK7 V01D 3/26, 3/30, 12, 2, 8 p. (in Russian).
10. Malyhin, N.V. (2018). Barbotazhnaya tarelka [Bubbling Dish]. Patent RF №176511, MPK6 V01D 3/20, 3, 2, 7 p. (in Russian).
11. Vankov, A.A., Shetinin, V.S. (2014). Vliyanie gidravlicheskogo soprotivleniya na konstruktivnye parametry kolonny [The effect of hydraulic resistance on the design parameters of the column]. MODERN HIGH TECHNOLOGIES, 8, 8-10. (in Russian).
12. Kadyrov, R.F., Blinichev, V.N., Chagin, O.V., Kadyrov, R.R. (2011). Paketnaya vihrevaya nasadka dlya teplo- i massoobmennyh kolonnyh apparatov [Batch vortex nozzle for heat and mass transfer column apparatuses]. Patent RF №2416461, MPK8 V01J 19/32, 11, 3, 9 p. (in Russian).
13. Shetinin, V.S., Stupin, A.V., Ivanovo, N.A., Kulik, A.A., Ustinov, V.A. (2011). Raschet gidravlicheskogo soprotivleniya kolonnogo apparata [Calculation of the hydraulic resistance of the column apparatus]. Komsomolsk-na-Amure: GOUVPO «Komsomolskij na Amure gosudarstvennyj tehnicheskij universitet. 32 p. (in Russian).
14. Taranov, L.V. (2004). Raschet tarelok rektifikacionnyh kolonn [Calculation of plates of rectification columns]. Tyumen: Trudy Tyumenskogo gosudarstvennogo neftegazovogo universiteta, 21-28. (in Russian).
15. Idelchik, I.E. (1975). Spravochnik po gidravlicheskomu soprotivleniyu [Handbook of Hydraulic Resistance]. M.: Mashinostroenie, 559 p. (in Russian).
16. Dzyubenko, B.V., Drejcer, G.A., Ashmantas, L.-V.A. (1988). Nestacionarnyj teplomassoobmen v puchkah vityh trub [Non-stationary heat and mass transfer in bundles of twisted pipes]. M.: Mashinostroenie, 240 p. (in Russian).

Recommended Citation

Sagdullaevich, Nurmukhamedov Habibulla; Tulkinovich, Mavlonov Elbek; Nishonova, S.Kh.; and Nurmukhamedov, Kh.S. (2024) "CALCULATION OF HYDRAULIC RESISTANCE OF A TUBULAR-GRIDSE NOZZLE WITH SPIRAL TURBULIZERS," Chemical Technology, Control and Management: Vol. 2024: Iss. 1, Article 2.
DOI: https://doi.org/10.59048/2181-1105.1524