DECISION-MAKING ALGORITHMS FOR DRILLING INSTRUMENT CONTROL SYSTEMS

Authors

Fuzayl Fozil ugli Odilov, Tashkent State Technical University. Address: 2 Universitetskaya st., 100095, Tashkent city, Republic of Uzbekistan. E-mail: texnolog.asu@gmail.com.Follow

Abstract

The control of the movement of the drilling tool and the structure of the well are considered. An effective control algorithm for drilling systems that provides control of well trajectory parameters is analyzed. In technological processes, it is necessary to control several parameters or several systems at the same time. It is considered necessary to create decision-making algorithms for the formation of managerial effects for the control system of such technological processes. The controlled oriented type of the bottom of the drill string was analyzed. Work was carried out on the decision-making algorithm for the processing of control effects. The principles based on the known concept of the combination of deterministic kinematic and statistical approaches aimed at determining various parametric deviations are considered.

First Page

66

Last Page

71

References

1. Yusupbekov, N.R., Aliyev, R.A., Aliyev, R.R., Yusupbekov, A.N. (2015). Intellectual controlling systems and decision making. Tashkent: National Encyclopedia of Uzbekistan. 472 p.
2. Zaripov, O.O., Khamrakulov, U.Sh., Fayziev, S.I., Sadikov, S.B., Mamadjanov, B.N. (2021). Algorithms for Intelligent Data Processing in Resource Management under Uncertainty and Dynamic Environment. International Conference on Information Science and Communications Technologies: Applications, Trends and Opportunities, ICISCT 2021.
3. Abdullaev, N.D, Petrov, Yu.P. (2005). Teoriya i metodi proektirovaniya optimalnix regulyatorov [Theory and methods of designing optimal regulators]. L.: Energoatomizdat, 240 p. (in Russian).
4. Alimbekov, R.I., Axmetzyanov, V.Z., Shulakov, A.C. (2002). Ustroystvo dlya orientirovaniya burovogo instrumenta pri provodke naklonno-napravlennix skvajin [A device for orienting drilling tools during directional operations]. Respubl. mejotrasl. Nauchnogo - konferensii po avtomatizatsii i mexanizatsii trudoyemkix proizvodstvennix protsessov na predpriyatiyax respubliki: Tezis. doklad. Ufa, 102-103 (in Russian).
5. Barskiy, I.L., Gusman, A.M., Ivina, A.B. (2001). Metod upravleniya dinamikoy burilnoy kolonni [The method of controlling the dynamics of the drill string]. Neftegazovie texnologii. 1 (in Russian).
6. Kolesnikov, H.A., Griguleskiy, V.G., Gorin, G.I. 1992. Sovremennie problemi bureniya neftyanix i gazovix skvajin [Modern problems of drilling oil and gas wells]. Neft i gaz. 1, 37-40 (in Russian).
7. Kudryavsev, A.B., Shulakov, A.C. (1999). Ispolzovanie RISC - kontrollerov v intellektualnix sistemax kontrolya parametrov bureniya skvajin [Use of RISK controllers in intelligent systems for monitoring well drilling parameters]. «Intellektualnoe upravlenie v slojnix sistemax - 99» Respublica nauchnoe texnologiya konferensii Ufa, 96 – 98 (in Russian).
8. Solodovnikov, V.V., Tumarkin, V.I. (1990). Teoriya slojnosti i proektirovanie sistem upravleniya [Complexity theory and control systems design]. M.: Nauka, 168 p. (in Russian).
9. Brakal, J.D., Azar, J.J. (2009). Prediction of welbore trajectory considering bottom hole, assembly and drill-bit SPE. Drill.Eng. 4, #2, 109-118.
10. Nugaev, I.F., Vasilyev, V.I., Alimbekov, R.I., Shulakov, A.S. (2002). Computerized technology of control and decision support for oil - welldirected drlling. Proc. of 4th Intern. Workshop on Computer Science and Information Technologies (CSIT'02), Greece, 104-110.
11. Leviskiy, A.Z. (2005). Geologo-texnologicheskie issledovaniya na stadii zakanchivaniya skvajin [Geological and technological research at the stage of well completion]. M.: «Neft i gaz» RGUNG imena Gubkina. (in Russian).
12. Leviskiy, A.Z., Komandrovskiy, V.G., Tenishev, V.M., Shilkin, I.V. (2000). Kompyuternie i informatsionnie texnologii v reshenii zadach operativnogo upravleniya bureniem [Computer and information technologies in solving problems of operational drilling management]. M.: «Neft i gaz» RGUNG im. Gubkina. 150 p. (in Russian).
13. Lukyanov, E.Ye., Strelchenko, V.V. (1997). Geologo-texnologicheskie issledovaniya v protsesse bureniya [Geological and technological research during drilling]. M.: «Neft i gaz» RGUNG imena. Gubkina. (in Russian).
14. Voskoboynikov, Yu.Ye. Ustoychivie metodi i algoritmi parametricheskoy identifikatsii [Robust methods and algorithms for parametric identification]. Novosibirsk: NGASU (Sibstrin), 2006. (in Russian).
15. Alimbekov, R.I., Vasilev, V.I., Nugaev, I.F., Shulakov, A.C. (2000). Kompyuterizirovannie texnologii upravleniya bureniem v neftyanoy i gazovoy promishlennosti [Computerized drilling control technologies in the oil and gas industry]. Neftyanoe xozyaystvo. 12. 120 - 122. (in Russian).
16. Lyashenko, G.V., Shtifel, A.P., Kulchiskiy, V.V., Sazonov, A.A., Larionov, A.S., Shebetov, A.A., Aleksandrov, V.L. (2009). Paradigma upravleniya stroitelstvom skvajin [Well Construction Management Paradigm]. NTJ «Injener-neftyanik». 3-2009, 17-20 (in Russian).

Recommended Citation

Odilov, Fuzayl Fozil ugli (2024) "DECISION-MAKING ALGORITHMS FOR DRILLING INSTRUMENT CONTROL SYSTEMS," Chemical Technology, Control and Management: Vol. 2024: Iss. 3, Article 9.
DOI: https://doi.org/10.59048/2181-1105.1579