A NEW METHOD OF DETERMINATION OF INTERCALIBRATION INTERVALS OF MEASURING INSTRUMENTS OF PHYSICO-CHEMICAL QUANTITIES TAKING INTO ACCOUNT THE UNCERTAINTY OF MEASUREMENTS

Authors

SH.M. Masharipov, Tashkent state technical university, Address: 100095 Tashkent, Universitetskaya st. 2, Tashkent sity, Republic of Uzbekistan.Follow
P.M. Matyaqubova, Tashkent state technical university, Address: 100095 Tashkent, Universitetskaya st. 2, Tashkent sity, Republic of Uzbekistan.Follow

Abstract

This paper presents a new method that can be applied in the field of metrology to determine and change the intercalibration periodicity during the operation of measuring instruments (certified standard chemical samples) used in the field of state metrological control and supervision. In modern metrology, the key issue is the determination and correction of intercalibration periodicity during the use of measuring instruments. The present paper presents a new method that can be applied in the sphere of state metrological control and supervision to improve the accuracy and reliability of measurements. The proposed method is intended only for exemplary measuring instruments and measurement standards and is not allowed to be applied to working equipment (technical devices for metrology experiments) used in production processes or in accredited testing laboratories. The research that was conducted shows that there is no systematized approach to the collection of reliable information on the instability of measuring devices, which hinders the reasonable determination of the inter-calibration periodicity of measuring instruments (based on the statistical data given). The establishment of initial information requires a large amount of time and access to limited reliable sources of reference values of physical quantities. This is connected with the necessity to use the protocols of research stability tests, which determine confidence limits of the standard instability indicators for a given period of time, as well as protocols of reliability tests, which establish confidence limits of metrological reliability indicators of the standard.

First Page

118

Last Page

123

References

1. Chunovkina, A.G., Pokhodun, A.I., Sulaberidze, V.S. (2020). The Problem of Determining and Adjusting the Inter-Calibration Intervals of Measuring Instruments. Meas Tech. 62, 863-868. https://doi.org/10.1007/s11018-020-01706-2

2. Zakharov, I., Semenikhin, V. (2022). Procedure for Determining the Inter-Calibration Interval of Measuring Instruments. 2022 XXXII International Scientific Symposium Metrology and Metrology Assurance (MMA), Sozopol, Bulgaria, 1-4, doi: 10.1109/MMA55579.2022.9993188.

3. Gupta, S.V. (January 13, 2012). Measurement Uncertainties: Physical Parameters and Calibration of Instruments. 2012 th Edition, Kindle Edition, Springer, 344 p.

4. Ellison, S.L.R., Williams, A. (2012). EURACHEM / CITAC Guide CG 4. Quantifying Uncertainty in Analytical Measurement. Third Edition. QUAM: 2012. P1. 141 p.

5. JCGM 101:2008 Evaluation of measurement data – Supplement 1 to the “Guide to the expression of uncertainty in measurement”. Propagation of distributions using a Monte Carlo method.

6. Masharipov, S., Qudratov, J. (2024). Experimental study of accuracy, precision, stability and uncertainty of physical and chemical quantities using certified reference materials, AIP Conference Proceedings., 3045(1), 030072.

7. Ellison, S.L.R., Williams, A. (2nd ed. 2019). Eurachem/CITAC. Guide: Metrological Traceability in Analytical measurement.

8. Masharipov, S.M., Mavlyanov, M.A., Abdumajidov, I.B. (2024). Metrological Requirements of International Standard ISO/IEC 17025:2017 and Experimental Study Questions on Metrological Traceability of Measurement Results, AIP Conference Proceedings., 2969(1), 060043

9. Masharipov, S.M., Rakhmatullaev, S.A. (2023). Kinematic viscosity of liquid media and providing metrological observability of experimental results, E3S Web of Conferences., 390, 01006

10. ISO/IEC 17043:2023 Conformity assessment – General requirements for the competence of proficiency testing providers.

11. NORDTEST Handbook of Internal Quality Control NT TR 569 edition 5.1 2018:09, Edition 5.1 September 2018

12. Technical Report No. 1/2007 March 2007. Measurement uncertainty revisited: Alternative approaches to uncertainty evaluation. European Federation of National Associations of Measurement, Testing and Analytical Laboratories.

13. Michael, H., Ramsey, S.L.R. (26 May 2017). Ellison. Combined uncertainty factor for sampling and analysis. Accred Qual Assur.

14. Handbook of Metrology and Applications. 2023 rd Edition by Dinesh K. Aswal (Editor), Sanjay Yadav (Editor), Toshiyuki Takatsuji (Editor), Prem Rachakonda (Editor), Harish Kumar (Editor), Publication date: August 24, 2023, 2528 p.

15. ILAC-G24/OIML D 10: Guidelines for the determination of recalibration intervals of measuring equipment.

16. Friedman, A.E. (2008). Fundamentals of metrology. Modern course. S.Pb.: NPO ‘Professional. 284 p.

17. Matyakubova, P.M, Masharipov, SH.M., Ruzmatov, K.R, Sultanov, M.K. (2021). Methods for monitoring metrological characteristics of scientific and physical parameters of intelligent sensors in real operating conditions. Journal of Physics: Conference Series, 1889, 1889 032037.

18. Pokhodun, A.I. (2006). Experimental methods of research. Errors and uncertainties of measurements. SPb: SPbSU ITMO, 112 p.

19. Efremova, N.Y., Kachur, S.A. (2006). Examples of uncertainty estimation from different areas of measurements and tests: Practical manual. Mn.: BelGIM, 60 p.

20. Shishkin, I.F. (2010). Theoretical metrology. Part 1. General theory of measurements: Textbook for universities. 4th ed., SPb.: Piter, 192 p.

21. The ASQ Metrology Handbook. Third Edition Heather A. Wade Hardcover, 2023. 736 p.

22. Bettencourt da Silva, R., Williams, A. (2015). Eurachem/CITAC Guide: Setting and Using Target Uncertainty in Chemical Measurement.

23. GOST 8.565-99. State system for ensuring the uniformity of measurements. Procedure for establishing and correcting verification intervals of measurement standards.

24. RMG 74-2004. State system for ensuring the uniformity of measurements, methods of determination of interverification and intercalibration intervals of measuring instruments intervals of measuring instruments.

25. Method of control of metrological serviceability of measuring transducer of non-electrical quantity and device for its implementation. 2321829.

26. Method of control of metrological serviceability of an intelligent measuring instrument. 2491510.

27. Temperature measuring transducer with metrological serviceability control. 2444707.

Recommended Citation

Masharipov, SH.M. and Matyaqubova, P.M. (2024) "A NEW METHOD OF DETERMINATION OF INTERCALIBRATION INTERVALS OF MEASURING INSTRUMENTS OF PHYSICO-CHEMICAL QUANTITIES TAKING INTO ACCOUNT THE UNCERTAINTY OF MEASUREMENTS," Chemical Technology, Control and Management: Vol. 2024: Iss. 5, Article 19.
DOI: https://doi.org/10.59048/2181-1105.1639