IMPROVEMENT OF METHODS AND MEANS FOR INCREASING THE ACCURACY OF INSTRUMENTS FOR MEASURING THE FLOW OF LIQUIDS AND GASES

Authors

U.A. Ruziyev, Tashkent State Technical University. Address: 2 Universitet Str., 100095, Tashkent City, Republic of Uzbekistan.
E.E. Ortikov, Tashkent State Technical University. Address: 2 Universitet Str., 100095, Tashkent City, Republic of Uzbekistan.Follow

Abstract

The work is devoted to the issue of increasing the accuracy of liquid flow measurement devices, containing a primary measuring transducer for measuring the pressure drop in a narrowed section of a pipeline, temperature sensors, a microprocessor, non-volatile memory, and a communication interface. To reduce uncertainty, the liquid flow measurement temperature compensation of the flow-measuring transducer is performed based on the readings of the temperature sensor installed in the measurement environment. The secondary transducer readings are calibrated based on the temperature sensor readings installed in the computing unit of the measuring device. For reliable measurement of the gas-liquid media flow, the measurement result values are corrected based on information about the measurement environment from the database recorded in the microprocessor memory.

First Page

138

Last Page

142

References

1. Wayne, L. (1990). Flowmeters: Accuracies are better, prices lower / I&CS. Instrument and control system. 29-33.

2. Ustroystvo izmereniya rasxoda gazojidkostnoy smesi [A device for measuring the flow rate of a gas-liquid mixture]. RU №2396519С1, МПК G01F 1/74, G01F1/20. (in Russian).

3. Sposob izmereniya rasxoda jidkosti [Method of measuring the flow of liquid]. RU №2617701С1, МПК G01F 1/34. (in Russian).

4. Yusupbekov, N.R., Gulyamov, Sh.M., Ortikov, E.E. (2022). Issledovanie vliyaniya nestatsionarnix gazoobraznix potokov na tochnost izmereniya rasxoda metodom peremennogo perepada davleniya [Investigation of the effect of unsteady gaseous flows on the accuracy of flow measurement by the method of variable pressure drop]. International Journal of Discoveries and Innovations in Applied Sciences. 2(11), 17-21. (in Russian).

5. Yusupbekov, N.R., Gulyamov, Sh.M., Ortikov, E.E. (2022). Nekotorie problemi avtomaticheskogo kontrolya i upravleniya v usloviyax neopredelennosti [Some problems of automatic control and management in conditions of uncertainty]. Central Asian Research Journal For Interdisciplinary Studies (CARJIS). 2(10) 65-70. DOI: 10.24412/2181-2454-2022-10-65-70. (in Russian).

6. ISO 5167-1:2003. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Part 1: general principles and requirements.

7. Nikiforov, V.O., Slita, O.V., Ushakov, A.V. (2011). Intellektualnoe upravlenie v usloviyax neopredelennosti: uchebnoe posobie [Intelligent management in conditions of uncertainty]. SPb: SPbGU ITMO, 226 p. (in Russian).

8. Ortikov, E.E. (July 27-28, 2023). Issledovanie vliyaniya razlichnix faktorov na rezultati avtomaticheskogo kontrolya i regulirovaniya malix rasxodov jidkix i gazoobraznыx smesey [Investigation of the influence of various factors on the results of automatic control and regulation of low flow rates of liquid and gaseous mixtures]. VIII International Scientific and Practical Conference «Challenges and problems of modern science», London, United Kingdom. 102-104. DOI https://doi.org/10.5281/zenodo.8208323.

Recommended Citation

Ruziyev, U.A. and Ortikov, E.E. (2024) "IMPROVEMENT OF METHODS AND MEANS FOR INCREASING THE ACCURACY OF INSTRUMENTS FOR MEASURING THE FLOW OF LIQUIDS AND GASES," Chemical Technology, Control and Management: Vol. 2024: Iss. 5, Article 23.
DOI: https://doi.org/10.59048/2181-1105.1643