STUDYING THE TECHNOLOGY FOR OBTAINING ZINC CHLORIDE FROM SPENT SUPPORTER WASTE IN AMMONIA PRODUCTION

Authors

A.T. Dadaxo‘jaev, Tashkent State Technical University named after I.A. Karimov, Tashkent, Uzbekistan;
Sodikjon Kadirov, Fergana State Technical University. Fergana. Uzbekistan. E-mail: qodirovazot443@mail.ru.Follow

Abstract

This article presents the results of research on the recycling of spent zinc adsorbents formed during the ammonia production process, aimed at obtaining zinc chloride (ZnCl₂), which can be utilized in various industrial sectors, including electroplating. The research covers the optimization of technological parameters such as hydrochloric acid concentration, temperature, and reaction time to efficiently extract zinc chloride. The experiments revealed that the best results are achieved by using a 20% hydrochloric acid solution, at a temperature of 60°C, with a reaction time of 60 minutes. The resulting 40% zinc chloride solution was tested in electroplating production, where it met the quality standards required for use in coating metallic products. The test results confirmed that the obtained zinc chloride, in terms of its physicochemical properties, is comparable to imported analogs and can be successfully applied in manufacturing processes requiring high-quality zinc coatings, as well as in other industries such as petrochemicals and corrosion protection of materials.

First Page

05

Last Page

09

References

1. Semenov, V. P. (1985). Proizvodstvo ammiaka [Ammonia production]. Moskva: Khimiya, 345 p. (in Russian).
2. Dantsig, G. A. (1979). Kataliticheskaya i khemosorbtsionnaya ochistka uglevodorodnykh gazov ot sernistykh soedineniy [Catalytic and chemisorption purification of hydrocarbon gases from sulfur compounds]. Moskva: NIITEKHIM, 55-67. (in Russian).
3. Ataman Chemicals. (n.d.). Ataman khimiya [Ataman Chemistry]. Retrieved from https://www.atamanchemicals.com/. (in Russian).
4. Samadiy, M.A., Rosilov, M.S., Khidirova, Yu.Kh. (2018). Metody polucheniya khloristogo tsinka [Methods of obtaining zinc chloride]. Universum: Tekhnicheskie nauki [Universum: Technical Sciences], (2) (47). Retrieved from https://7universum.com/ru/tech/archive/item/5480. (in Russian).
5. Spravochnik khimika 21 (khimiya i khimicheskaya tekhnologiya) [Chemist's Handbook 21: Chemistry and Chemical Technology]. Poglotitel’ GIAP [Absorbent GIAP]. Retrieved from http://www.chem21.info/page/22332. (in Russian).
6. Dadakhojaev, A.T., Tavashov, Sh.Kh. (2019). Vybor metoda pererabotki otrabotannogo GIAP-10 v tsinkovye belila [Choice of a method for processing spent GIAP-10 into zinc white]. Sanoat va qishloq xo‘jaligining dolzarb muammolarini yechishda innovatsion texnologiyalarning ahamiyati mavzusidagi Respublika ilmiy-amaliy anjumani maqolalari to‘plami, April 26-27, 2019, Qarshi, 53-55.

Recommended Citation

Dadaxo‘jaev, A.T. and Kadirov, Sodikjon (2025) "STUDYING THE TECHNOLOGY FOR OBTAINING ZINC CHLORIDE FROM SPENT SUPPORTER WASTE IN AMMONIA PRODUCTION," Chemical Technology, Control and Management: Vol. 2025: Iss. 2, Article 1.
DOI: https://doi.org/10.59048/2181-1105.1672