INVESTIGATION OF THE FUEL COMBUSTION PROCESS IN GAS-FIRED FURNACES FOR AUTOMATION SYSTEMS

Authors

N.R. Yusupbekov, Tashkent State Technical University. Address: 2 Universitet st., 100095, Tashkent city, Republic of Uzbekistan. E-mail: dodabek@mail.ru;
Sh.M. Gulyamov, Tashkent State Technical University. Address: 2 Universitet st., 100095, Tashkent city, Republic of Uzbekistan.
A.T. Rajabov, Tashkent State Technical University. Address: 2 Universitet st., 100095, Tashkent city, Republic of Uzbekistan. E-mail: azik_2511@mail.ru;Follow
U.U. Kholmanov, Tashkent State Technical University. Address: 2 Universitet st., 100095, Tashkent city, Republic of Uzbekistan. E-mail: xolmanov0902@mail.ru.

Abstract

The regularities of the combustion process of gaseous fuel in chamber furnaces are described. This process represents a homogeneous reaction in which there is no distinct boundary surface between the fuel and the oxidizer. It is shown that the latter either mix and then burn subsequently, or both processes occur simultaneously, corresponding respectively to kinetic and diffusion combustion. The structure of a turbulent-diffusion flame of gaseous fuel combustion is presented.

First Page

32

Last Page

37

References

1. Kasabov, I., Zashkova, L. (1994). Tekhnicheska termodinamika i toplotekhnika [Engineering Thermodynamics and Heat Engineering]. Sofiya: Martilen. (in Russian).
2. Baucal, C.E. (2000). Heat transfer in industrial combustion. New York: CRC Press.
3. Xolmanov, U.U., Rajabov, A.T. (2021). Automatic control of fuel efficiency in gas burning furnaces. Advances in Intelligent Systems and Computing, 1323. 334-341. https://doi.org/10.1007/978-3-030-68004-6_44.
4. Kasabov, I., Atanasov, A., Zashkova, L. (1991). R"kovodstvo za kursovo i preddiplomno proektirane na toplinni protsesi, agregati i s"or"zheniya v silikatnata promishlenost [Guide for Course and Pre-Diploma Design of Thermal Processes, Units, and Equipment in the Silicate Industry]. Sofiya: STU. (in Russian).
5. Gulyamov, Sh.M., Xolmanov, U.U., Rajabov, A.T. (2021). Mathematic simulation of glass melting process in glass production. Chemical technology. Control and management. 2(98), 70-74. https://doi.org/10.51346/tstu-02.21.1-77-0010.
6. B"chvarov, S. (2003). Tekhnologiya na keramikata [Ceramics Technology], Sofiya: Serasvati. (in Russian).
7. Warnatz, J., Maas, U., Dibble, R.W. (2001). Combustion - physical and chemical fundamentals, modeling and simulations,experiments, pollutant formation. Springer.
8. Zashkova, L., Penkova, N., Kasabov, I. (2011). Toplotekhnicheski agregati v silikatnata promishlenost [Thermal Units in the Silicate Industry]. Sofiya: KHTMU. (in Russian).

Recommended Citation

Yusupbekov, N.R.; Gulyamov, Sh.M.; Rajabov, A.T.; and Kholmanov, U.U. (2025) "INVESTIGATION OF THE FUEL COMBUSTION PROCESS IN GAS-FIRED FURNACES FOR AUTOMATION SYSTEMS," Chemical Technology, Control and Management: Vol. 2025: Iss. 5, Article 4.
DOI: https://doi.org/10.59048/2181-1105.1714