The distribution of impurities along the height of the conical part of the hydrocyclone in the purification of hydrocarbons

Authors

A.A. Khudaiberdiev, Candidate of Technical Sciences, Senior Researcher at INSTITUTE OF GENERAL AND INORGANIC CHEMISTRY OF THE ACADEMY OF SCIENCES, THE REPUBLIC OF UZBEKISTAN Tel: +998977218842Follow
A.M. Hurmamatov, Candidate of Technical Sciences, Senior Researcher, Head of the Laboratory “Processes and Apparatuses of Chemical Technology” of the Institute of General and Inorganic Chemistry of the Academy of Sciences of the Republic of Uzbekistan. Tel .: +998911926469 (m.).Follow
O.Yu Ismailov, Institute of General and Inorganic Chemistry of the Academy of Sciences of the Republic of UzbekistanFollow

Abstract

The results of the study of the process of purification of hydrocarbons from mechanical impurities using hydrocyclone are presented. The distribution curves of the equivalent diameter of the "equilibrium" particles along the height of the conical part of the test sample of the hydrocyclone are constructed (D = 0.4 m, HK = 0.65 m). The analysis of the obtained data showed the possibility of centrifugal purification of hydrocarbon raw materials from particles with a size of 0.024 to 0.2 mm, depending on the physical properties of the phases to be separated. The distribution pattern of the equivalent diameter of the particles of HF = a (RC) can be used as a recommendation for the selection of the formulas of the conical part of hydrocyclones.

First Page

20

Last Page

24

References

1. O.YU.Ismailov, “Ustanovka dlya izucheniya obrazovaniya otlojeniy na vnutrenney poverhnosti trub teploobmenny'h apparatov” [Installation for studying the formation of deposits on the inner surface of pipes of heat exchangers], Uzbekskiy himicheskiy jurnal, no. 6, pp. 49-55, 2016 (in Russian).

2. O.YU.Ismailov, T.Z.Rahmonov, “Izuchenie usloviya obrazovaniya otlojeniy v trubah teploobmenny'h apparatah” [Study of the conditions for the formation of deposits in the pipes of heat exchangers], Nauchno-tehnicheskiy jurnal: Himicheskaya promy'shlennost', no. 2, pp. 74-78, 2017 (in Russian).

3. A.A.Hudayberdiev, A.A.Artikov, H.T.Salomov, “Raspredelenie nagara v predvaritel'ny'h distillyatorah ND-1250” [Distribution of carbon deposits in preliminary distillers ND-1250], Jurnal: Maslo-jirovaya promy'shlennost', no. 11, pp. 11-13, 1983 (in Russian).

4. K.F.Pavlov, P.G.Romankov, A.A.Noskov, Primery' i zadachi po kursu processov i apparatov himicheskoy tehnologii. Uchebnoe posobie dlya vuzov / Pod red. P.G. Romankova. - 10-e izd., pererab. i dop.- L.: Himiya, 1987. - 576 s. - S. 96-97, 529.

5. O.YU.Ismailov, A.A.Hudoyberdiev, A.M.Hurmamatov, “Issledovanie zavisimosti koe`fficienta teploperedachi ot tolsch'iny' nakipi i rejima dvijeniya nagrevaemoy neftegazokondensatnoy smesi v gorizontal'noy trube” [Investigation of the dependence of both effective heat transfer on the scale thickness and the mode of movement of the heated oil and gas condensate mixture in a horizontal pipe], Nauchno-tehnicheskiy jurnal: Neftepererabotka i neftehimiya, no. 2, pp. 42-45, 2017 (in Russian).

6. A.G.Kasatkin, Osnovny'e processy' i apparaty' himicheskoy tehnologii [Basic processes and devices of chemical technology]. Moskva: Himiya, 1971, 784 p. (in Russian).

7. A.I.Skoblo, YU.K.Molokanov, A.I.Vladimirov i dr., Processy' i apparaty' neftegazopererabotki i neftehimii [Process and apparatus of oil and gas processing and petrochemistry]. Sankt-Peterburg: Nedra, 2000, 677 p. (in Russian).

8. I.I.Ponikarov, O.A.Perely'gin, V.N.Doronin, M.G.Gaynullin, Mashiny' i apparaty' himicheskih prozvodstv [Chemical production machines and devises], Moskva: Mashinostroenie, 1989, 368 p. (in Russian).

9. A.A.Hudayberdiev, “Sovershenstvovanie processa predvaritel'noy distillyacii miscelly' rastitel'nogo masla” [Process improvement in the pre-separation miskelly distillation of vegetable oil], Dis. kand. tehn. nauk, TashPI, Tashkent, 1988, 197 p. (in Russian).

10. I.G.Grinman, V.H.Denisov, “Gidrociklon dlya klassifikacii produktov izmel'cheniya” [Hydrocyclone for classification of grinding products], A.s. SU 673316, 15.07.1979.

11. E`.L.SCH'erbakov, V.N.Bry'zgalov, “Gidrociklon” [Hydrocyclone], A.s. SU 1357082 A1., 07.12.1987.

12. V.YU.Jityanny'y, V.V.Naydenko, V.V.Petrov, S.YU.Le'mushkin, “Gidrociklon” [Hydrocyclone], A.s. SU 1567282 A1., 30.05.1990.

13. S.A.Ahmetov, Tehnologiya glubokoy pererabotki nefti i gaza [Technology of deep processing of oil and gas]. Sankt-Peterburg: Nedra, 2013. 544 p. (in Russian).

14. O.F.Glagoleva, V.M.Kapustin, T.G.Gyul'misaryan i dr., Tehnologiya pererabotki nefti [The technology of oil refining]. Moskva: Himiya, 2006, 400 p. (in Russian).

15. A.M.Hurmamatov, “Rezul'taty' granulometricheskogo analiza chastic mehanicheskih primesey uglevodorodnogo sy'r'ya” [Results of granulometric analysis of partial mechanical primes of the hydrocarbon series], Uzbekskiy himicheskiy jurnal, no. 1, pp. 44-48, 2015.

16. A.M.Hurmamatov, “Vy'sokoe`ffektivny'y gidrociklon dlya ochistki uglevodorodnogo sy'r'ya ot melkodispersny'h chastic” [Highly efficient hydrocyclones for cleaning hydrocarbon raw materials from fine particles], Uzbekskiy jurnal nefti i gaza, no. 4, pp. 48-50, 2017.

Recommended Citation

Khudaiberdiev, A.A.; Hurmamatov, A.M.; and Ismailov, O.Yu (2018) "The distribution of impurities along the height of the conical part of the hydrocyclone in the purification of hydrocarbons," Chemical Technology, Control and Management: Vol. 2018: Iss. 2, Article 4.
DOI: https://doi.org/10.34920/2018.3.20-24